Earthquake Table

 Do you want to test your creations to the extreme? Then do it with this lego Earthquake table

MATERIALS NEEDED 

1. 1 binder

2. 1 lego base plate

3. 2 jumbo rubber bands

4. 4 of the same sized bouncy balls

STEPS

1. cut binder front and back off of the clamps

2. discard the clamp

3.  center base plate on the front of the binder put the rubber band on the edge of the base plate over both front and back of the binder. 

4. aligned with the jumbo rubber bands put bouncy balls one inch away on both sides of the rubber bands 

HOW TO USE
1. pull front and back apart by about one inch. Release and make sure it works.
2. repeat with building on top of the table.